Aerosol 400ml Clear Insulating Varnish Spray Conformal Coating for PCB Circuit Board Protection

Product Description

Aerosol 400ml Clear Insulating Varnish Spray conformal coating for PCB circuit board protection

Product Description

PCB Conformal Coating Spray is designed to provide thin acrylic transparent layered coating on printed circuit board and other electronic circuits to protect against humidity, moisture, fungus and corrosion. This coating helps in preventing short circuit and corrosion of conductors and solder joints. Used on printed circuit boards as protective coating against moisture, dust, humidity and fungus. Ease of inspection is further enhanced because of fluoresces under UV light thereby offering on-line inspection enabling faster production cycle.

Product Features

• Fluorescent under UV light
• Provides environmental and mechanical protection
• Superior toughness and abrasion Resistance
• Easily removable with soldering iron or suitable solvent

Product Parameters

Product Name	PCB CONFORMAL COATING
Packaging Type	Spray Bottle
Packaging Size	400ml
Color	Clear
Material Type	Acrylic
Components	One
Specific Gravity	0.9
Cure	Air dry
Dielectric Strength	20 kV/mm
Viscosity @ 25 C, cP	13
Drying time	1 hour depending on film thickness and drying temperatures
Operating Temperature, C	-40 to 120
Usage/Application	Protective coating for PCB
Brand	Kingarch or Private label
Form	Aerosol
Country of Origin	China
Product Use	It is widely used in hybrid integrated circuit, automotive electronic control board, electronic circuit board, aviation instrumentation, soft printed circuit board, computer control board, industrial control board, semiconductor crystal line protection, home appliance controller, and other electronic parts.

 

Detailed Photos

 

DIRECTIONS FOR USE

1. Cleaning-Before spray, clean the surface from any dirt, water, oil, grease, etc, and dry.
2. Covering-Cover the places need no spray, especially places of linker, socket, switch, plug board that allows no coating.
3. Pay attention to the thickness of layer, dont spray too much onto one place.
4. Shake the can well before use, and keep the can 15-30cm from surface to spray.
5. To repair components covered with AR Conforming Coating, just simply remove the coating by using a electrocautery to touch the coated part, then install the new component, clean the area with a brush, and after dry, spray the AR Conforming Coating again to cover it.