| Customization: | Available |
|---|---|
| CAS No.: | Mixture |
| Formula: | N/a |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Kingarch 750ml Permanent Road Marking Paint Aerosol Spray
Inverted Marking Paint
Product Description
KINGARCH 750ML Line Marker is lead-free, high performance, fast-drying, acrylic resin based ine marking paint. Suitable for interior and exterior use - car parks, factories, playgrounds, sports fields, warehouses, tennis courts, gold clubs, leisure centres and roads. Ideal for marking sharp, clear, durable lines - use to produce clear demarcation lines on factory floors, car parks and warehouses. Use on asphalt, concrete, gravel and grass.
Features:
- For use on roads, carparks, factory floors, school playing fields, leisure centres & golf Courses
- Provides a hard wearing, fast drying permanent line
- Suitable for use on concrete, tarmac, wood and composites
- Can be used both internally and externally
- CFC free aerosol
Directions:
1. Surface to be marked should be dry and free from dust and grease.
2. Shake can vigorously for 1 -2 minutes until glass beads inside can move freely.
3. Invert aerosol, direct spray towards the surface to be marked from a distance of 8-12 inches.
4. Nozzle must be cleared in any pause during use. Hold can upright and spray for 2 - 3 seconds to clear nozzle.
|
Bottle Size |
65mm*300mm |
|
Product Packing |
12 cans/case |
|
Main function |
line marking paint |
|
Colors |
White/Yellow/Blue/Red/Green/Black/Orange etc. |
| Tack Free Time mins (25ºC) |
1-3 |
| Touch Dry Time mins (25ºC) |
30 |
|
Brand |
KINGARCH or customer label |
Technical Specification
|
Ejection rate |
≥1.5g/s(rapid construction) |
|
Fine degree |
≤ 15um(no clogging by spraying, high gloss) |
|
Spraying area |
1.5 square meter (according to the surface smooth degree and coating thickness will be a deviation) |
|
Drying time: |
5-8 mins for surface drying and 24 hours for hard drying |
|
Spit out rate |
≥98% |
|
Bendability |
≤ 2mm |
|
Adhesion force |
Level 2 |
|
HB Hardness |
≥HB |
PRODUCT FEATURES
1. Excellent weather resistance;
2. High gloss and color retention;
3. Good chemical resistance and water resistance;
4. Suitable with suitable primer and strong adhesion force.
5. Good leveling property, strong covering power and good polishing quality;
1. Clean surface thoroughly, removing all dirt, grease, oil, wax, rust, moisture, etc.
2. Shake can vigorously for 1-2 minutes before spraying and occasionally while in use to ensure color uniformity and prevent clogging.
3. Hold the can 20-30cm from the surface to be sprayed, press spray button firmly with steady even strokes while moving can rapidly back and forth.
4. 2 or 3 thin coats with intermittence of 10 min are better than on continuous heavy coat.
5. Always clean spray button immediately after use by tuning can upside down and pressing spray button until no more paint comes out .
6. Avoid spraying in rainy day or freezing environment.
Storage
1.Store in a cool, ventilated warehouse.
2.Away from fire, heat source.
3.Storage temperature does not exceed 50 ºC, relative humidity less than 80%.
4.Keep container closed.
Attention
KEEP IT OUT OF REACH OF CHILDREN; store it in cool, dry and well-ventilated place lower than 45 degrees; keep away from fire source; do not puncture or burn the bottle.
){kind=link}