| Customization: | Available |
|---|---|
| CAS No.: | Mixture |
| Formula: | N/a |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Circut Board corrosion protection Aerosol Coating Spray AR Acrylic Conformal Coating Spray
PCB Conformal Coating Spray is designed to provide thin acrylic transparent layered coating on printed circuit board and other electronic circuits to protect against humidity, moisture, fungus and corrosion. This coating helps in preventing short circuit and corrosion of conductors and solder joints. Used on printed circuit boards as protective coating against moisture, dust, humidity and fungus. Ease of inspection is further enhanced because of fluoresces under UV light thereby offering on-line inspection enabling faster production cycle.• Fluorescent under UV light
• Provides environmental and mechanical protection
• Superior toughness and abrasion Resistance
• Easily removable with soldering iron or suitable solvent
| Product Name | PCB CONFORMAL COATING |
| Packaging Type | Spray Bottle |
| Packaging Size | 400ml |
| Color | Clear |
| Material Type | Acrylic |
| Components | One |
| Specific Gravity | 0.9 |
| Cure | Air dry |
| Dielectric Strength | 20 kV/mm |
| Viscosity @ 25 C, cP | 13 |
| Drying time | 1 hour depending on film thickness and drying temperatures |
| Operating Temperature, C | -40 to 120 |
| Usage/Application | Protective coating for PCB |
| Brand | Kingarch or Private label |
| Form | Aerosol |
| Country of Origin | China |
| Product Use | It is widely used in hybrid integrated circuit, automotive electronic control board, electronic circuit board, aviation instrumentation, soft printed circuit board, computer control board, industrial control board, semiconductor crystal line protection, home appliance controller, and other electronic parts. |
1. Cleaning-Before spray, clean the surface from any dirt, water, oil, grease, etc, and dry.
2. Covering-Cover the places need no spray, especially places of linker, socket, switch, plug board that allows no coating.
3. Pay attention to the thickness of layer, dont spray too much onto one place.
4. Shake the can well before use, and keep the can 15-30cm from surface to spray.
5. To repair components covered with AR Conforming Coating, just simply remove the coating by using a electrocautery to touch the coated part, then install the new component, clean the area with a brush, and after dry, spray the AR Conforming Coating again to cover it.
){kind=link}